STUDI EKSPERIMEN PERILAKU DINAMIK JEMBATAN PCI GIRDER DENGAN MENGGUNAKAN AKSELEROMETER

Maizuar Maizuar

Abstract


Abstrak

 

Jembatan merupakan salah satu sarana infrastruktur transportasi penghubung yang penting. Dalam masa layan kerusakan struktur sebuah jembatan dipengaruhi oleh bermacam faktor beban dan kondisi lingkungan. Struktur jembatan yang sudah menua (ageing bridge) dan kenaikan beban lalu lintas adalah subjek yang harus dimonitor pada pemeliharaan jembatan. Dalam rangka pengukuran kapasitas struktur perlu dilakukan pengawasan rutin dan evaluasi integritas konstruksi sipil dengan menggunakan metode tanpa merusak benda uji (Non Destructive Testing Techniques). Metode ini dapat memberikan informasi tentang respon struktur jembatan. Penelitian ini dilakukan untuk memperoleh data percepatan dengan menggunakan akselerometer yang akan diolah untuk mendapatkan respon struktur berupa frekuensi alami dan lendutan yang terjadi pada tengah bentang jembatan. Selanjutnya dengan menggunakan software Geopsy diperoleh frekuensi alami sebesar 4,3256 Hz. Sedangkan lendutan diperoleh dengan menggunakan software DADiSP sebesar 0,43 cm pada pembebanan truk 28 ton dan lendutan sebesar 0,5 cm pada beban lalu lintas normal.

 

Kata kunci: Akselerometer, frekuensi alami, jembatan, lendutan, perilaku dinamik

 

Abstract

 

Bridges are crucial transport infrastructure. In practice, structural damage of a bridge accumulates over its life-span caused mainly by loadings and environmental condition. Ageing bridge structures subject to increasing demand from heavy traffic loading is subject in monitoring and maintenance of bridges. Structural capacity and integrity of bridges need to be routinely monitored and evaluated using non dectructive testing (NDT) techniques. The NDT method could provide information on structural respond of bridges. This study investigates structural respond of a bridge (e.g., natural frequency and displacement) using accelerometer sensor. The results of study show that the natural frequency obtained using Geopsy software is 4,3256 Hz. Using DADiSP software, the displacement of the bridge is obtained 0,43 cm under design truck load of 28 ton and displacement of 0,5 cm under normal traffic condition.

 

Keywords: Accelerometer, natural frequency, bridge, displacement, dynamic behaviour


Full Text:

PDF

References


Bedon, C., Bergamo, E., Izzi, M. & Noè, S. 2018. Prototyping and validation of MEMS accelerometers for structural health monitoring—The case study of the Pietratagliata cable-stayed bridge. Journal of Sensor and Actuator Networks, 7, 30.

Chen, H.-P. 2018. Structural health monitoring of large civil engineering structures, John Wiley & Sons.

Comisu, C.-C., Taranu, N., Boaca, G. & Scutaru, M.-C. 2017. Structural health monitoring system of bridges. Procedia Engineering, 199, 2054-2059.

Imran, I., Hoedajanto, D. & Zarkasi, I. 2014. Bridges in Indonesia: Present and future. International forum, JSCE century anniversary. Tokyo, Japan.

Kolakowski, P. 2007. Structural health monitoring-A review with the emphasis on low-frequency methods. Engineering Transactions, 55, 239-275.

Kumar, S. & Mahto, D. 2013. Recent trends in industrial and other engineering applications of non destructive testing: A review. International Journal of Scientific & Engineering Research, 4, 183-195.

Maizuar, Akbar, S. J. & Salahuddin 2020a. Developing a low-cost vibration measurement system prototype for bridges using accelerometer sensors: A review. International Journal of Psychosocial Rehabilitation, 24, 12-19.

Maizuar, M., Akbar, S. J., Wesli, W. & Burhanuddin 2019. Reliability-based approach for residual life prediction of bridges subjected to earthquake shocks degradation. Teras Jurnal-Jurnal Teknik Sipil, 9, 63-70.

Maizuar, M., Zhang, L., Miramini, S., Mendis, P. & Duffield, C. 2020b. Structural health monitoring of bridges using advanced non-destructive testing technique. ACMSM25. Springer.

Zhang, L., Maizuar, M., Mendis, P., Duffield, C. & Thompson, R. 2016. Monitor the dynamic behaviour of concrete bridges using non-contact sensors (IBIS-S). Applied Mechanics and Materials, 846, 225-230.




DOI: http://dx.doi.org/10.29103/tj.v10i2.353

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Maizuar Maizuar

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

P-ISSN: 2088-0651 

E-ISSN: 2502-1680

 Google Scholar

 
Accredited based on Sinta 3 based on the Decree of the Director General of Strengthening Research and Development of the Ministry of Research, Technology and Higher Education of the Republic of Indonesia Number 230/E/KPT/2022
Valid for 5 years, Volume 12 Number 2 Year 2022 to Volume 17 Number 1 Year 2027

 

Creative Commons "Attribution-ShareAlike”

Attibusion Internasional (CC BY-SA 4.0)




Published 2 times a year
March and September

Published by:
The Research institutions and community service (LPPM) Universitas Malikussaleh

In cooperation with Ikatan Sarjana Teknik Sipil (ISATSI NAD) Lhokseumawe


Web Analytics

View My Stats